| Acoustical (each loudspeaker) (1) |
Operating Frequency Range ( 2)
|
...
|
±4 dB 70 Hz - 200 Hz
|
|
|
... |
±70° 70 Hz - 200 Hz
|
|
|
... |
> 142 dB @ 1 meter
|
|
Dynamic Range
|
... |
> 120 dB
|
|
| Coverage |
| |
... |
120° Horizontal x 120° vertical |
|
| Transducers |
|
Low Frequency
|
...
|
Two 12" cone drivers
|
|
| Audio Input |
|
Type
|
...
|
10 k ohms impedance, electronically balanced
|
|
Connector
|
... |
Female XLR input and male XLR output or VEAM
|
|
Nominal Input Level
|
... |
+4 dBu
|
|
| Amplifiers |
|
Type
|
...
|
Complementary power MOSFET output stages (audio class AB/H)
|
|
|
... |
1240 Watts (620 watts/channel)
|
|
THD, IM, TIM
|
... |
< .02 %
|
|
| AC Power |
|
Connector
|
...
|
250V NEMA L6-20P (twistlock) inlet, IEC 309 male inlet or
VEAM
|
|
Automatic Voltage Selection
|
... |
85 - 134 VAC; 165 - 264 VAC; 50/60 Hz (4)
|
|
Operational Voltage Range
|
... |
Turn on: 85 VAC; Turn off: 134 VAC; 50/60 Hz
|
|
|
... |
Turn on: 165 VAC; Turn off: 264 VAC; 50/60 Hz
|
|
Max.Continuous RMS Current (> 10 sec)
|
... |
at 115 V: 8 A rms
at 230 V: 4 A rms
at 100 V: 10 A rms
|
|
Burst RMS Current (< 1 sec)
|
... |
at 115 V: 15 A rms
at 230 V: 8 A rms
at 100 V: 18 A rms
|
|
Max Peak Current During Burst
|
... |
at 115 V: 22 A pk
at 230 V: 11 A pk
at 100 V: 25 A pk
|
|
Inrush current
|
... |
< 12 A at 115 V
|
|
| Physical |
|
Dimensions
|
... |
21.26" w x 36.00" h x 30.00" d
(540 mm x 914 mm x 762 mm)
|
|
Weight
|
... |
163 lbs (73.93 kg); Shipping: 210 lbs (95.26 kg)
|
|
Enclosure
|
... |
Multi-ply hardwood
|
|
Finish
|
... |
Black textured
|
|
Protective Grille
|
... |
Perforated steel grille, charcoal-grey foam
|
|
Rigging
|
... |
Six aircraft pan fittings (three on both top and bottom).
Working load for each fitting is 600 lbs (273 kg) basedon
a 5:1 safety factor with a straight tensile pull.
Optional L-Track rigging system: Working load at vertical
pull using any two points is 1500 lbs (682 kg) based on a
5:1 safety factor. (Based on a New Haven part number NH47556-1
fitting.)
|
|
| Notes |
|
1. Acoustical specifications are for the minimum configuration
of two DS-4P cabinets and are measured on axis at 2 meters. One
meter figure is derived from this data.
2. Subject to half space loading, measured with one-third octave
frequency resolution in fixed ISO bands.
3. Nominal 8 ohms resistive load, pink noise, 100V peak.
4. The unit is rated at 95-125 VAC and 208-235 VAC, 50/60 Hz, to
satisfy EC standards for -10% to 6% AC line voltage.
|
