LD-2 Line Driver
| Features & Benefits
| • |
Integrates different
self-powered speakers |
| • |
Maintains signal integrity
for long cable paths |
| • |
Separate mid-hi, Mid-Bass/AUX,
and subwoofer output controls |
| • |
Optimized filters to accommodate
specific array configurations |
|
 |
|
The LD-2 is a compact, one rack space device designed specifically
for integrating different types of Meyer Sound self-powered loudspeakers
into an optimized full-range system. As a line driver, the LD-2 can
connect to cable runs of up to 1000 feet without introducing instability
or distortion. In addition, the LD-2 incorporates a number of switching
and filter options to facilitate quick set-up and accommodate a variety
of different system configurations.
Each channel of the LD-2 includes three output/control sections, designated
Mid-Hi, Mid-Bass/AUX and Sub. Each section provides a gain control (-12
to +6 dB) and Mute switch with LED. In addition, the Mid-Hi section
has an Array EQ filter to minimize the low-mid rise caused by horizontal
arrays of three to five MSL-4 self-powered loudspeaker systems; and
Low Cut filter which performs a crossover function by either sending
a full range signal to the Mid-Hi output or rolling off at 160Hz (12dB/octave).
The Mid-Bass/AUX section also includes a low cut filter (160Hz, 12dB/octave).
A separate Mid-Bass and Sub Crossover switch enables the LD-2 to accommodate
either Mid-Bass or Subwoofers or both Mid-Bass and Subs, in the same
system. With the switch engaged, the signal divides at 80Hz between
the Mid-Bass and Sub outputs. With the switch out, a full range signal
is sent to both sections. Polarity switches in both the Mid-Bass and
Sub sections allow quick correction of any polarity reversal or allignment
optimization problems. If only full range and subwoofers are used in
the main system, the Mid-Bass/AUX section is available for auxiliary
systems such as front-fill, down-fill or delays.
A Master section includes a gain control, a master Mute switch with
LED, and a signal presence/clip LED. The compact, single rack space
cabinet is made of 16-gauge steel to provide magnetic isolation from
nearby devices, EMI immunity and protection from accidental impact damage.
|
|
Specifications
Datasheet (PDF)
Operating Instructions
(PDF)
|
