| Acoustical (each loudspeaker) (1) |
Operating Frequency Range |
...
|
±4 dB 500 Hz - 15 kHz |
Phase Response |
... |
±35° 400 Hz - 11 kHz |
Maximum SPL |
... |
110 dB @ 100 meters |
Dynamic Range |
... |
> 110 dB |
|
| Coverage |
(-6 dB points) |
...
|
10° Horizontal x 10° vertical |
|
| Transducers |
Low Frequency |
...
|
12" Cone driver |
High Frequency |
... |
2" Throat, 4" diaphragm compression driver |
Hf DC Protection |
... |
20 mf capacitor |
|
| Audio Input |
Type |
...
|
10 k ohm impedance, electronically balanced |
Connector |
... |
Female XLR input and male XLR loop output or VEAM |
Nominal Input Level |
... |
+4 dBu (1.23 Vrms) |
|
| Amplifiers |
Type |
...
|
Complementary power MOSFET output stages class AB/H |
Burst Capability |
... |
1240 Watts (620 watts/channel) |
THD, IM, TIM |
... |
< 0.02 % |
|
| AC Power |
Connector |
...
|
250 V NEMA L6-20P, IEC 309 Twistlock male receptacle or VEAM(2) |
Automatic voltage selection |
... |
85 - 134 VAC; 165 - 264 VAC; 50 Hz/60 Hz (3) |
Max.Continuous RMS Current (>10 sec) |
... |
at 115 V: 8 A rms
at 230 V: 4 A rms
at 100 V: 10 A rms |
Burst RMS Current (<1 sec) |
... |
at 115 V: 15 A rms
at 230 V: 8 A rms
at 100 V: 18 A rms |
Max Peak Current During Burst |
... |
at 115 V: 22 A pk
at 230 V: 11 A pk
at 100 V: 25 A pk |
Inrush Current |
... |
<12 A at 115 V |
|
| Physical |
Dimensions |
... |
54.00" W x 54.00" H x 48.28" D
(1372 mm x 1372 mm x 1226 mm) |
Weight |
... |
293 lbs (132.90 kg); with yoke: 392 lbs (177.81 kg) |
Enclosure |
... |
Fiberglass |
Finish |
... |
Black textured |
Rigging |
... |
Rigging yoke mounts a single SB-1; allows horizontal and vertical angle adjustments |
|
| Notes |
1. Measured at 5 meters on-axis, free field conditions, with pink noise input in 1/3-octave bands.
2. Other connectors available.
3. The unit is rated at 95 - 125 VAC and 208 - 235 VAC, 50/60 Hz, to satisfy EC standards for -10% to 6% AC line voltage. |
