MSL-5 High Power Loudspeaker System 60°H 40°V 42 1/2" wide 56 3/4" tall 32" deep 500 lbs (227 kg) Max SPL (Peak/Cont): 120/110 Freq Range: 100-16 kHz Note: Acoustical specifications are given for the standard configuration of two 30° sections, measured at 100 feet (30m).
Features Extremely high power Exceptional clarity Point source arraying Compact enclosure Long-term reliability	Applications Large-scale touring Concert reinforcement Paging & announcing Outdoor sports arenas Stadiums Racetracks

The Meyer Sound MSL-5 is an extremely high-power, high-definition loudspeaker system designed for large-scale music reinforcement and public address applications. Unique in its class, it combines exceptionally consistent directivity with seamless arraying performance for precise coverage control.

The MSL-5 comprises an all-horn, integral loudspeaker cabinet constructed as a 30-degree arrayable section, with two proprietary 12-inch cone low-frequency drivers in a vented, horn-loaded enclosure and three 2-inch throat (4-inch diaphram) high-frequency horn drivers. The cabinet is fitted with handles and with rigging lift rings having a 1500 lb. maximum safe working load capacity that are bolted directly to an internal steel frame.

Designed specifically for use with SIM® System II, the MSL-5 requires the M-5 Control Electronics Unit and its standard minimum configuration comprises two loudspeaker cabinets. The MSL-5 effectively covers the vocal range and may be used alone for paging applications. In music reinforcement applications, the DS-2 Mid-Bass Loudspeaker is recommended to supplement the low-frequency performance of the system.

MSL-5 Specifications

You can download this product data sheet in Adobe Acrobat format.

Acoustical - MSL-5/M-5 System 1
Frequency Response 2	±4 dB from 100 Hz to 16 kHz
Maximum SPL at 100 feet (30 meters)
Continuous	110dB
Peak	120dB
Coverage	40° vertical x 60° horizontal
MSL-5 Loudspeaker (one 30° section)
Driver Complement	(4) MS-12 12-inch cone drivers
	(3) MS-2001 2-inch throat (4-inch diaphram) horn drivers
HF DC Protection	50 uf polypropylene capacitor
Enclosure	Vented, horn-loaded, 12-ply hardwood
Finish	Black textured, charcoal grey carpet or weather protected (optional)
Protective Grill	Two-piece hex punched metal screen, damped, charcoal grey foam covering
Rigging	Twelve points, pivoting lift rings, 1500 lb. maximum safe working load capacity
Dimensions	42 1/2" W x 56 3/4" H x 32" D
Weight	500 lbs (227 kg)
Connector	EP-4, EP-5 (Europe only), Pyle National (optional)
M-5 Control Electronics Unit
Input Type	Active balanced, 10k ohms, ISO™ Input
Output Type	Active push-pull, 600 ohm drive
Maximum Input/Output Level
Unbalanced	+20 dBv
Balanced	+26 dBv
Hum and Noise	-90 dBv ("A" weighted)
Dynamic Range	110 dB
Electronic Crossover Frequency	800 Hz
Driver Protection Circuits
Low Frequency	RMS, peak and excursion limiters
High Frequency	RMS, peak and excursion limiters
Indicators	Power LED
	HF and LF Sense LED's
	HF and LF Limit LED's
	Safe LED
Controls	Power switch
	Safe/AutoSafe switch
	Input Attenuation (calibrated in dB)
Connectors
Input	3-pin XLR-type female, rear panel mounted
Output	3-pin XLR-type male, rear panel mounted
Sense	Dual banana receptacles, rear panel mounted

Footnotes:

1. Acoustical specifications are given for the standard configuration of two 30° sections.
2. Measured 5 meters on axis, free-field conditions, pink noise input, in third-octave bands.

Download a complete product data sheet in Adobe Acrobat format.