UPL-1 High Definition
Self-Powered Loudspeaker System

90°H 40°V
14" wide
20 3/4" tall
16" deep
70 lbs (32 kg)
Max SPL (Peak): 124 dB
Freq Range: 32-20 kHz

Features

Self-powered
Two-way biamplified
Electronically corrected
Individually factory-aligned
Patented horn driver
Compound-flare horn
Patents pending

Applications

Live music clubs
Theatrical sound
Conference rooms
Portable paging systems
Foreground music playback

The Meyer Sound UPL-1 is a self-contained, high-definition powered loudspeaker that is a suitable for a wide variety of high-quality sound reinforcement applications. It is optimized to approximate a true point-source radiator within its coverage area, and features a frequency response of ±2 dB from 50 Hz to 18 kHz.

The UPL-1 comprises a 10-inch cone low-frequency driver and 1-inch high-frequency driver with 90° by 40° modified radial horn housed in a vented cabinet. An active crossover, optimized pole-zero response correction filters, loudspeaker element protection circuitry and dual power amplifiers are built directly into the enclosure.

Both UPL-1 drivers are of a proprietary design and are individually factory-tested for maximum linearity. The high-frequency horn driver is of an entirely new configuration, employing a titantium dome and fabric suspension in a patented, low distortion design (U.S. patent number 4,152,552). It is coupled to a modified radial horn that provides excellent directivity control with wide horizontal high-frequency coverage.

The UPL-1's power amplifiers utilize complementary power MOSFET output stages in a class AB configuration. Input sensitivity is switchable to either +4 dBu or -10 dBV.

UPL-1 Specifications

You can download this product data sheet in Adobe Acrobat format.

Acoustical (each speaker)
Frequency Response 1 ±2 dB from 50 Hz to 18 kHz 2; -3 dB at 32 Hz and 20 kHz
Maximum SPL 124 dB peak @ 1 meter
Signal-to-Noise Ratio > 100 dB
Coverage Angle 90° horizontal by 40° vertical
Audio Input
Type Electronically balanced, 10k ohms impedance
Connector XLR (A-3) female
Nominal Input Level +4 dBu or -10 dBV, switchable

Amplifiers
Type Complementary power MOSFET output stages
Power Output
Low Frequency 200 watts burst capability
High Frequency 100 watts burst capability
THD, IM, TIM < .02 %
Crossover Optimized pole-zero filter combinations to complement transducer response and to achieve acoustical transparency and flat phase 3
Transducers
Low Frequency 10" diameter cone (2" voice coil)
High Frequency 1" titanium dome horn driver (1" voice coil) 4
Power 3-pin IEC male receptacle. Voltage selector switch for 100/120/220/240 VAC, 50 or 60 Hz (accepts voltages from 90 to 260 VAC), 175 W maximum.
Physical
Dimensions 14" W x 20 3/4" H x 14" D (+ 2 1/2" additional depth for amplifier chassis and 2" for grill with foam)
Weight 70 lbs (32 kg)
Rigging 3/8"-16 nut plates, top and bottom
Grill Perforated metal screen, grey foam covering
Finish Black textured

Footnotes:

  1. Subject to room loading. Specified for 8 feet actual distance between UPL-1 cabinet and a single boundary surface, measured with one-third octave frequency resolution in fixed ISO bands.
  2. Specified with grill removed. Response tolerance ±3 dB with grill screen and foam in place.
  3. U.S. patent #5,185,801 (additional patent pending).
  4. U.S. patent #4,152,552.

Unless otherwise specified, all acoustical measurements are performed at 1 meter from front baffle on high-frequency horn axis. Acoustical decibels are specified re 20 uPa.

You can download this product data sheet in Adobe Acrobat format.

Footer


homepage homepage products sound lab news company careers support sales/rentals contact request information contact copyright privacy policy trademarks