 |
|
|
| ||||||||||||||||
| ||||||||||||||||
|
 |
||
 |
| MAPP Online Pro | Features | Quick Start | Loudspeaker Measurements | Acoustical Information |
MAPP Online Pro Release NotesVersion Release 2.9.10 - Code Date: June 9, 2008 - Release Date: June 12, 2008Global Changes and Enhancements: The export graphics feature for Room response in the Virtual SIM window has been restored. Version Release 2.9.05 - Code Date: June 4, 2008 - Release Date: June 5, 2008Global Changes and Enhancements: The processor control table in the Virtual SIM window has been updated to be compatible with all operating systems. Version Release 2.8.96 - Code Date: May 21, 2008 - Release Date: May 22, 2008Global Changes and Enhancements: The UPQ-1P has been added to the Individual Loudspeaker and Loudspeaker System menus. Version Release 2.8.63 - Code Date: March 28, 2008 - Release Date: April 3, 2008Global Changes and Enhancements: Improved regional compatibility for all operating systems. Version Release 2.8.62 - Code Date: March 7, 2008 - Release Date: March 17, 2008Global Changes and Enhancements: MM-4XP has been added to the Individual Loudspeaker selection menu. Version Release 2.8.61 - Code Date: Feb. 4, 2008- Release Date: Feb. 4, 2008Global Changes and Enhancements: Minor fix to M'elodie Ground Stacked Loudspeaker Systems. Version Release 2.8.54 - Code Date: Sept. 28, 2007- Release Date: October 31, 2007Global Changes and Enhancements: Arbitrary angles allowed when inserting or editing the properties of M Series Horizontal Loudspeaker Systems. Version Release 2.8.48 - Code Date: Sept. 18, 2007- Release Date: October 2, 2007Global Changes and Enhancements: Additional rigging elements for the 600-HP and M'elodie have been added to the Ground Stacked and Flown Loudspeaker System array builders. Import Settings has been added to the File Menu under Import. This allows the user to import Device Configuration Settings and Project Properties from any XML or ZIP file saved from MAPP Online Pro 2.7.60 or higher. Sound Field Window and Menus: Sound Field SPL Range is available from the Settings Menu. The available range is from 42-72dB in 3dB increments. This does not have any effect on the SPL value of predictied results. This only a display setting it is exclusive to the Sound Field. Image Export Options is available from the Settings Menu. This allows the user to always export Sound Field graphic images at the same value for every session. The default is set to use the On Screen Image Size. Preset values are available or they can be entered manually. Virtual SIM Window and Menus: Any single microphone will become active once it is selected and moved within the Sound Field. Additional shortcuts for zoom control have been added to the impulse response window. Macintosh and PC Users Version Release 2.7.80 - Code Date: June 7, 2007- Release Date: June 11, 2007Global Changes and Enhancements: EQ Enabled\Bypass, Polarity, Delay & Gain have been added to the Device Configuration Window. Loudspeaker, Microphone, Flown, Ground Stacked, and Horizontal Loudspeaker System windows have been updated to maintain consistency with the Device Configuration Window. Natural Environment controls are now available from a window that can remain open while working on a project. Files saved from the ancient version 2.1.58 are now compatible. Sound Field Window and Menus: All loudspeaker system dialogs, whether on Edit or Insert, always default to unchecked for Save As Individual Loudspeakers. Virtual SIM Window and Menus: Output Control Table updated to be consistent with Device Configuration Window. Version Release 2.7.66 - Code Date: May 22, 2007- Release Date: May 23, 2007Virtual SIM Window and Menus: This update fixes the range of processor output gain for all channels. The maximum is 0 and the minimum is -60dB This update also fixes the range of the Parametric EQ filters for all output channels. Gain for the TruShaping EQ can also be set within the range of -18dB to +18dB. The automatic adjustment of the Vertical Scale SIM trace has been updated and no longer modifies the dynamic range of the Virtual SIM graph. Version Release 2.7.60 - Code Date: May 9, 2007- Release Date: May 16, 2007Global Changes and Enhancements: The Meyer Sound MAPP Online Pro servers have been optimized for faster prediction results. The Startup Screen has been removed. Version notations can be retrieved in the "About MAPP Online Pro" box available from the Help Menu. UPJunior has been added to the Individual Loudspeaker as well as the Loudspeaker System array builder. Stella-4 has been added to the Individual Loudspeaker as well as the Loudspeaker System array builder. MTS-4A vertical has been implemented in the Individual Loudspeaker dialog. The Insert Loudspeaker System option has been divided into three separate types: MG-MICA Ground Stack has been added to the Loudspeaker System array builder. Additional hardware elements have been implemented. Please refer to the 600-HP Operating Instructions, the MG-MICA Assembly Guide as well as the MG-M'elodie Assembly Guide for ground stack specifications. 600-HP Ground Stack to M'elodie is not yet supported. MTF-MICA-M'elodie has been added to the rigging options for MICA Flown and Ground Stack Loudspeaker Systems. Device Configuration is a new feature that was built to keep your system organized giving each 16 channel processor and 8 channel microphone switcher a unique hardware address. The limit is 24 microphones and 80 processor channels. From here you can label your microphone and processor channels. This window can remain open while using the functions from the Virtual SIM window. Most dialogs have been updated with new column headers and tables. Some of the visual buttons have also been updated. The Dynamic Update option has been removed. The function is now always on unless the microphone channel used to measure the system is muted. Mute, gain, polarity and delay controls have been removed from all loudspeaker elements. These controls are now exclusive to each output processor channel. The Solo function has been added to every loudspeaker element to isolate a single element from many if more than one is being used on a single output processor channel. The Release Notes are now available from the Help Contents (F1) in the Help Menu. Compatibility with files saved in 2.5.54 and previous versions: Files saved using version 2.5.54 or earlier will not import the followng items when opened in 2.7: Sound Field Window and Menus: The Configure menu has been removed and replaced by the Insert menu. The Settings menu has been added to include Prediction Plane, Natural Environment, and Frequency Range as well as Background Color, Grid, SPL Palette, and Measurement Units. The View menu only includes items that are specific to global properties for the Sound Field: Center Line, Array COG, Array Zones (MG-MICA), Extents, Zoom In, Zoom Out and Zoom to Extents. Dynamic Update has been removed from the View Menu. The new global setting is "Microphones Muted" available from the "Right Click" or "Pop-Up" Menu. Loudspeakers Enabled has been removed from the program. Muting is now controlled by the Processor via the Virtual SIM window and it's global setting is included in the "Right-Click" or "Pop-Up" Menu as "Processor Outputs Muted." A prediction status indicator has been added to the lower left corner of the window. Virtual SIM Window and Menus: The Settings menu has been added to include Device Configuration and Background Color. Additional configuration table has been added to allow the user to select microphones and processor channels via the hardware address and channel pull down cells. The names can be changed here as well but can also be accessed by opening the Device Configuration window. Polarity, Delay, Gain, and Mute are driven by the processor channel. The "Selector" has been formatted and is currently only active for the "Live Trace" predicited in Spectrum, Impulse Response, and Frequency Response. Version Release 2.5.54 - Code Date: April 7, 2006 - Release Date: May 2, 2006M'elodie has been added to the Individual Loudspeaker as well as the Loudspeaker System array builder. Macintosh and PC Users Version Release 2.5.37 - Code Date: January 30, 2006Loudspeaker System now has the option of facing Left or Right within the Sound Field. Version Release 2.5.24 - Code Date: January 10, 2006Bug fix to allow the opening of MAPP Pro files older than Version 2.1.17. More options are available to the user when generating Project Reports. KNOWN ISSUES: Version Release 2.5.12 - Code Date: December 22, 2005Visual clean up of the Virtual SIM window. Version Release 2.5.07 - Code Date: December 20, 2005Virtual SIM® has a new look and now features a virtual single output channel Galileo Composite EQ™ which includes TruShaping and Parametric equalizers as well as High and Low Pass Filters. The Frequency Response Window now has four view options: Room (uncorrected response), Processor (equalizer), Result (corrected response), and Group (uncorrected, corrected, and equalizer). The Room view shows the original response of the speaker in the space. The Processor view shows the current live eq curve which can be inverted. The Result view shows the response of the speaker system. The Group view shows the response of the speaker system and equalizer combined. The Live Branch Selector is used to select the desired processor output to apply equalization. PSW-2 has been added to the individual as well as the Loudspeaker System array builder. MG-MICA with MGCP center bracket support has been added to the Loudspeaker System array builder. The centerline display can now be individually controlled by the loudspeaker properties as well as globally from the view menu. We've resized some of the fonts to make additional space for the Virtual SIM window. The status and information columns below the sound field and Virtual SIM graphs will always be shown. This way the user will always know the environmental settings without having to go to the configure menu. Version Release 2.1.72 - Code Date: August 17, 2005Rigging Zone support added to MG-MICA along with updated graphics. Zone markers are colour-coded and the zone crossing annotated in the rigging information table. The MG-2D Ground Stack (extended and retracted) now displays COG graphics and rigging loads. All loudspeaker systems now show enclosure graphics. The SB-1 POL file was recalibrated The Loudspeaker limit was lowered from 400 to 100 All graphical objects, including sound field images and DXF entities, are clipped to the prediction plane. View Menu support has been added for showing Center of Gravity zones (Settings are saved on exit). DXF import more stable than previous versions as well as improved efficiency in DXF rendering. MAPP Pro Servers Updated Version Release 2.1.67 - Code Date: June 28, 2005Array COG support added to MG-MICA SB-1 was added to the individual list of loudspeakers. New keyboard shortcuts have been added for configuring visual aids (architectural and multi-level) Tutorial Files are located at http://www.meyersound.com/mapponlinepro/tutorial The side effect of leaving the current zoom in place on new predictions has been corrected: changing prediction plane size no longer causes the next prediction to use the old prediction plane aspect ratio the first time, but instead immediately corrects the aspect ratio. Version Release 2.1.60 - Code Date: May 25, 2005MICA Extended Link was renamed to MICA Extended Position. M3D and M3D-Sub functionality corrected. MSL-6 (Horizontal Orientation Only) was added to the individual as well as the Loudspeaker System array builder. MG2D Selection in the Loudspeaker System drop-list has been re-ordered. KNOWN ISSUES: Version Release 2.1.58 - Code Date: May 20, 2005MICA was added to the list of Loudspeakers as well as the MG-MICA Top grid. MVC-5 was added as a single element in the Loudspeaker System builder. It will not be available in the legacy Individual Loudspeaker window. Added support for MG-2D ground stacking Added support for MG-1D rigging positions. Added support for MTG-1D rigging positions. Added support for Center of Gravity for MG-2D and MG-3D/M. KNOWN ISSUES: Version Release 2.1.40 - Code Date: February 9, 2005Enhancements were made to the dxf import feature. Added support for MG-2D Transition Frame allows first M2D to achieve angles between 0 and -7. Version Release 2.1.37 - Code Date: January 27, 2005MILO 60 was added to the list of Individual Loudspeakers. Version Release 2.1.36 - Code Date: January 26, 2005UNDO: One level of "Undo" was added to the program. The Delete Confirmation Dialog Box was removed. Light Gray was added to the list of background colors. MILO 60 vertical data was added to the Loudspeaker System model list. Version 2.1 HISTORY:
UPDATES SINCE MAPP ONLINE 1.3.004q
REMINDERS: Shortcuts have been updated to accommodate both Macintosh and PC users.
The MAPP Online Professional Support Team 510-486-1166 | mapponlinepro@meyersound.com |
MAPP Pro RELATED PAPERS MAPP: Predicted & Curvilinear arrays Low Frequency For questions or more info: |
|||||||||||||||||||
|
|
Contact
Us | Terms of Use | Trademarks |
