Specifications
| Physical |
Dimensions |
...
|
19.00" W x 3.50" H x 7.50" D standard rack mount |
Weight |
...
|
13 lbs (5.90 kg) |
|
| Acoustical |
|
...
|
20 Hz – 20 kHz ±0.5 dB |
Total Harmonic Distortion ( 2) |
... |
< 0.01% |
Hum and Noise |
... |
-90 dBV “A” weighted, unbalanced |
|
... |
110 dB |
|
| Inputs |
Type |
...
|
|
Impedance |
... |
20k ohms balanced |
|
... |
+4 dBu nominal, +20 dBu maximum |
|
| Outputs |
Type |
...
|
Balanced active push-pull |
Impedance |
... |
300 ohms, 150 ohms per branch unbalanced |
Level |
... |
+4 dBu nominal, +26 dBu maximum |
|
| Controls |
Front Panel |
...
|
EQ In/Out, Center Frequency, Bandwidth, Boost/Cut, Lo and Hi Shelving Cut |
Rear Panel |
... |
Ground Lift switch, Gain switch, AC Voltage switch |
|
| Indicators |
Power |
... |
Green LED |
Ready |
... |
Green LED |
Clip (Input and Output) |
... |
Red LEDs |
|
| AC Power |
Connectors |
... |
3-pin XLR male (outputs) and female (inputs) |
Power |
... |
120/240V AC, 50/60 Hz, rear-panel switchable |
|
| Notes |
1. All equalization circuits out.
2. 1 kHz input at +4 dBu.
3. “A” weighted noise floor to maximum RMS output.
4. Within the operating band of each channel, maximum input level is the minimum worst-case level achieved before clipping. |
|
|
Specifications
Datasheet (PDF)
Operating Instructions (PDF)
|
