Galileo Loudspeaker Management: Galileo 616 | Galileo 616 AES | Galileo 408

Galileo and Compass

NETWORK CONNECTION PROCEDURES

September 8, 2008

QUICK NETWORK SETUP FOR MACINTOSH 10.4.11 or later

Using a Macintosh computer and a standard ethernet cable, one end plugged into the Galileo ethernet port, the other into the Macintosh ethernet port.

System Preferences > Network

Select a new Location and label it "Galileo Direct"
Show: Built-in Ethernet
Select TCP/IP
Configure IPv4: Manually
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
Router: 192.168.0.1 (Galileo uses the term: "Gateway")

Galileo Front Panel: System Settings > Network

Select "Static" for IP Type
IP Address: 192.168.0.170
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1

Scroll down using the navigation buttons and select: "Write Network Settings"

QUICK NETWORK SETUP FOR WINDOWS XP SP2

Using a computer running Windows XP SP2 and a standard ethernet cable, one end plugged into the Galileo ethernet port, the other into the computer's ethernet port.

Settings > Network Connections > Local Area Connection > Properties

Select Internet Protocol TCP/IP
Select "Properties"
Select "Use the following IP address:"
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
Leave DNS Server address blank

Galileo Front Panel: System Settings > Network

Select "Static" for IP Type
IP Address: 192.168.0.170
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1

Scroll down using the navigation buttons and select: "Write Network Settings"

COMPASS CONTROL SOFTWARE SETTINGS

Galileos Tab

Press the "Add Galileo" Button
IP Address: 192.168.0.170
Nickname: Galileo
Tab Name: Click OK to accept default name or create a new name.
Press "Refresh" to check the network status of the Galileo.
Press the "Connect" button when the network status shows "Available." This will create a new tab at the top of the window.

 

Go to Compass page

 

 

Update Information
Release Notes

Firmware Installation
Online Instructions

User Guides

Compass User Guide

Compass User Guide Addendum 2.2.0

Compass User Guide Addendum 2.4.0

Compass User Guide Addendum 2.4.1

Compass User Guide Addendum 2.5.0

Compass User Guide Addendum 2.5.2

Compass User Guide Addendum 2.6.0

Compass User Guide Addendum 2.6.1

Compass User Guide Addendum 2.6.2

Galileo User Guide

Galileo 616 AES User Guide Addendum

Galileo Quick Start Guide

Architectural Specs

Galileo switcher option

Alternate System Memory Boot Procedure

Reset Galileo 408 Network Settings to DHCP

Network Setup Tips
Connection Procedures

Support
galileo@meyersound.com


Footer


homepage homepage products sound lab news company careers support sales/rentals contact request information contact copyright privacy policy trademarks