 |
MRK-700 Rigging Kit, 700-HP
The 700-HP is designed to be rigged using the professional components
included in the MRK-700 rigging kit. This optional rigging kit is
available installed at the factory or as a field upgrade. The MRK-700
utilizes rugged rigging bars (shown), AlignaLinks and quick release
pins to connect adjacent subwoofers in ground-stack or flown array
configurations, as well as to the MTG-700 top grid. |
 |
MTG-700 Top Grid, 700-HP
The MTG-700 top grid allows 700-HP subwoofers fitted with the MRK-700
rigging kit to be flown in an array. The MTG-700 can accommodate
a variety of different pickup configurations using its six pick-up
points. Up to 10 700-HPs may be suspended from the MTG-700 using
the corner pick-up points on the grid on a single or multiple rigging
points of appropriate rating with a safety factor of 7:1. |
 |
MCF-700 Caster Frame, 700-HP
The heavy-duty MCF-700 caster frame is highly durable and easy
to attach to a 700-HP ultrahigh-power subwoofer. When you’re
deploying and striking a 700-HP array, the MCF-700 frame can support
the weight of the array, making it easy to assemble or disassemble.
The MCF-700 also supports up to three 700-HP subwoofers in a ground-stack
configuration. The MCF-700’s rugged steel frame allows the
use of a forklift. A range of protective transport covers is available.
|
 |
MRF-600 Rigging Kit, 600-HP
The 600-HP is designed to be rigged directly to MICA or the MG-MICA grid using the professional components included in the MRF-600 rigging kit. This optional rigging kit is available installed at the factory or as a field upgrade. The MRF-600 kit utilizes a rugged rigging frame, GuideALinks and quick release pins to connect the 600-HP to other 600-HP subwoofers, to MICA loudspeakers, or to the MG-MICA grid. |
 |
MG-MICA Multipurpose Grid/MICA/600-HP
The MG-MICA multipurpose grid accommodates flown or ground stack configurations
for MICA compact high-power curvilinear array loudspeakers and 600-HP
compact high-power subwoofers (with optional MRK-600 rigging kit).
The MG-MICA allows multiple rigging points. In addition with the use
of the MGCP-MICA a single rigging point can be achieved. Up to 22
MICA loudspeakers (or the equivalent weight of any combination of
MICA and 600-HP cabinets) can be flown from the MG-MICA grid at a
7:1 safety factor, or 25 MICA loudspeakers at a 5:1 safety factor.
Certain restrictions apply, and this rating depends on grid angle
and the array’s center of gravity, which can be determined using
MAPP Online Pro’s rigging calculator. |
 |
MCF-MICA Caster Frame, MICA/600-HP
The MCF-MICA caster frame allows up to four MICA cabinets or three
600-HP cabinets (with optional MRK-600 rigging kit) to be transported
fully rigged, and is dimensioned to provide tight packing in both
U.S. and European truck widths. To make MICA entirely road-ready,
durable nylon covers for up to four cabinets are also available.
|
 |
MRF-6 Rigging Frame, MSL-6/MSL-5/PSW-6
The MRF-6 allows Meyer Sound Type 6 (MSL-6, MSL-5 and PSW-6) loudspeakers
to easily be arrayed. Two frames are recommended per cabinet. Transition
between Type 6 and Type 4 (MSL-4 and DS-4P) loudspeakers fitted
with L-Track or with the RFK-1 retrofit frame kit can easily be
achieved utilizing SMCC-007 or SMCC-009 swiveling multi-link connecting
chains. |
 |
MRFCB-6 Connecting Bar Kit, MSL-6/MSL-5/PSW-6
The MRFCB-6 consists of two rear and two front connecting bars
along with all necessary pins for joining two MRF-6 frames together
vertically. The front connecting bars provide for vertical splay
adjustments from 0° to 10° in 2° increments. |
 |
MRFSB-1 Spacer Bar, MSL-6/MSL-5/PSW-6
MRFSB-1 is fitted between two MRF-6 rigging frames when attaching
the frames to carpeted Type 6 loudspeaker systems. MRFS-1 compensates
for the extra width of the carpeted versions. |
 |
MTG-4 Top Grid, MSL-4/DS-4P
The MTG-4 is used for arraying Type 4 (MSL-4 and DS-4P) loudspeakers
fitted with L-Track or with the RFK-1 retrofit frame kit. The frame’s
retractable arms are adjustable, even while the system is under
load. Loudspeakers can be arrayed at horizontal angles of 15, 18.75,
22.5, 26.25 and 30-degree splay angles. |
 |
MTGSB-4B Top Grid Spreader Bar, MSL-4/DS-4P
Used to suspend two MTG-4 top grids from a single motor point.
Includes all necessary shackles and connecting links. Six pick up
points are provided at each end of the bar to allow the adjustment
of spread between vertical columns. This part replaces the MTGSB-4
spreader bar. |
 |
RCL-1 Rear Connection Link
Forms the rear attachment between L-Track equipped cabinets and
maintains alignment when applying vertical splay. |
 |
MCC Multi-link Connecting Chains
Three lengths of connecting chain are available to suit specific
applications. MCC-007 is used in a similar manner to the SLC-1 in
that it connects the uppermost L-Track-equipped loudspeaker in a
vertical column to an MTG-4. Its extra length allows flexibility
in attachment. The MCC-009 provides between 0° and 19° of
vertical splay. The MCC-015 provides between 0° and 26°
of vertical splay. |
 |
SMCC Swiveling Multi-link Connecting Chains
Two lengths of connecting chain incorporating a swiveling connector
are available to suit specific applications, particularly those
that require a transition from MRF-6 to Type 4 (MSL-4 and DS-4P)
loudspeakers fitted with L-Track or with the RFK-1 retrofit frame.
The SMCC-007 provides between 0° and 15.5° of vertical splay.
The SMCC-009 provides between 0° and 19° of vertical splay.
|
 |
SLCC-1 Single Link Connection Chain
Used to attach the uppermost loudspeaker in a vertical column to
an MTG-4. |
 |
RFK-1 Retrofit Frame Kit, MSL-4/DS-4P/DS-2P/PSW-2
The RFK-1 retrofit frame kit contains two aluminum frames, necessary
cables and L-Track fittings. It is used to integrate non L-Track-equipped
MSL-4, DS-4P, DS-2P and PSW-2 loudspeakers into a QuickFly rigging
system. Specify exact loudspeaker type when ordering. |
 |
MYA-CQ Mounting Yoke Assembly, CQ-1/2
Cradle-style mounting yoke for a single CQ-1/2 loudspeaker. Cabinet
must be fitted with two M10 nut plates (included) on its base. A
hanging clamp ("C" or "G" type) and a steel
safety cable are required to enable the yoke to be used (not supplied
as a part of the yoke assembly kit). |
 |
MRF-CQ30 Rigging Frame, CQ-2
Steel rigging frame. Arrays CQ-2s at a fixed 30° splay angle.
Requires MRFPB-CQ for hanging and tilting. The loudspeaker cabinet
must be fitted with ring and stud lifting hardware (not supplied
as a part of the frame assembly kit). Illustration shows two MRF-CQ30
rigging frames and three MRFPB-CQ rigging frame pick-up bars. |
 |
MRF-CQ40 Rigging Frame, CQ-2
Steel rigging frame. Arrays CQ-2s at a fixed 40° splay angle.
Requires MRFPB-CQ for hanging and tilting. The loudspeaker cabinet
must be fitted with ring and stud lifting hardware (not supplied
as a part of the frame assembly kit). Illustration shows two MRF-CQ40
rigging frames and three MRFPB-CQ rigging frame pick-up bars. |
 |
MRFPB-CQ Rigging Frame Pick-up Bar, CQ-1/2
Steel plate placed between two MRF-CQ rigging frames and/or on
the ends providing multiple pick-up points for tilting the array.
Illustration shows two MRFPB-CQ rigging frame pick-up bars and accompanying
rigging frames. |
