Your search for "M2D" returned the following: |
|
|
 |
|
Compatibility
- M2D
- M2D-Sub
- MTK-2D
- MTB-2D/M
- M3D
- M3D-Sub
Part #: 40.112.050.01 |
| The versatile MG-2D multipurpose grid allows the M2D and M2D-Sub loudspeakers to be flown or ground stacked. MG-2D also provides a transition from the bottom of an M3D/M3D-Sub array to an M2D/M2D-Sub array. Up to 16 M2Ds (or a combination of M2Ds and M2D-Subs of comparable weight) may be flown from single or multiple rigging points of appropriate rating. When all the features and load capacity of the MG-2D is not needed, small arrays of M2Ds can be flown using the MG-1D. |
 |
|
Compatibility
- MILO
- M2D
- MG-2D
- PBF-MILO
- MILO 60
- MILO 120
Part #: 40.132.033.01 |
| The MTB-2D/M transition bar facilitates connection of a MG-2D multipurpose grid underneath a MILO array to allow simple and secure attachment to M2D compact curvilinear array loudspeakers being used for near and/or down fill applications. |
 |
|
Compatibility
- M2D
- M2D-Sub
- M3D
- M3D-Sub
- MG-2D
Part #: 40.112.058.01 |
| To suspend M2D/M2D-Subs under an array of M3D/M3D-Subs a combination of the MG-2D multipurpose grid and the MTK-2D transition kit must be used. The MTK-2D provides required adjustable connecting bars and pins. |
|
|
Compatibility
- M1D
- M1D-Sub
- M2D
- DF-4
- UPA-1P
- UPA-2P
- MSL-4
- DS-4P
Part #: 40.115.100.01 |
| The versatile MG-1D multipurpose grid allows M1D/M1D-Sub loudspeakers to be flown or ground stacked. MG-1D also provides a transition from the bottom of an M2D/M2D-Sub array to an M1D/M1D-Sub array. Up to 16 M1Ds (or the equivalent weight of M1Ds and M1D-Subs) may be suspended from single or multiple rigging points of appropriate rating. In addition the MD-1D can be used to fly M2Ds and/or M2D-Subs. Up to seven M2Ds (or the equivalent weight of any combination of M2Ds and M2D-Subs) can be flown from the MG-1D grid at a 7:1 safety factor, or 10 M2Ds at a 5:1 safety factor. |
Replacement Parts
|
|
Compatibility
Part #: 40.112.025.01 |
| MRF-2D M2D side rigging frame replacement kit - Can be used on the left or right side. Important: This is a replacement part. It is included when ordering M2D. Can be used on Left or Right side. |
|
PIN-QRP
Connecting Hardware
|
Compatibility
Part #: 134.018 |
| 5/16" X 1.25" QRP "T" handle - Used in all M2D rigging holes |
|
