Your search for "MILO" returned the following: |
|
|
 |
MG-3D/M
Multipurpose Grid
|
Compatibility
- MILO
- MILO 60
- MILO 120
- M3D
- M3D-Sub
Part #: 40.132.035.01 |
| The MG-3D/M multipurpose grid accommodates multiple hanging configurations or ground support for M3D and MILO, MILO 120 or MILO 60 high-power curvilinear loudspeaker and M3D-Sub. MG-3D/M allows multipoint support and bridles. Up to 24 MILO loudspeakers (or the equivalent weight of MILOs and/or M3Ds and M3D-Subs) to be flown from the MG-3D/M. Ground stacks of up to six MILOs (or the equivalent height of MILOs and M3D-Subs) may be achieved. Important: REQUIRES MLK-3D to use with M3D/M3D-Sub loudspeaker. (Part Number 40.132.120.01)
REQUIRES MLK-MILO to use with MILO / MILO 60 / MILO 120 loudspeakers (Part Number 40.132.125.01). Does not ship with pins. They are included in the above kits.
For more info on using MG-3D with MILO, see: http://meyersound.com/products/mseries/milo/quickfly.htm |
|
|
Compatibility
Part #: 40.132.125.01 |
| The MLK-MILO link kit is required to attach a MILO, MILO 120 or MILO 60 high-power curvilinear loudspeaker to the MG-3D/M multipurpose grid and must be purchased separately. The kit provides all necessary links and pins. The MLK-MILO is included in the MILO DWG files. Important: For more info on using MG-3D with MILO, see: http://meyersound.com/products/mseries/milo/quickfly.htm |
|
MATB-3D
Transition Bar - Adjustable
|
Compatibility
- MTR-3D/M
- M3D
- M3D-Sub
- MILO
- MILO 60
Part #: 61.132.115.01 |
| MATB-3D Adjustable transition bar - used when attaching MTR-3D/M to M3D/M3D-Sub.
Important: Requires MTR-3D/M Transition Rail |
|
|
Compatibility
- M3D
- M3D-Sub
- MILO
- MATB-3D
- MILO 60
- MILO 120
Part #: 40.132.110.01 |
| The MTR-3D/M transition rail kit provides a simple and secure method of attaching MILO, MILO 120 or MILO 60 high-power curvilinear loudspeakers beneath or above M3D line array loudspeakers and/or M3D-Sub directional subwoofers. |
 |
MVE-MILO Bar
Vertical Extension Bar
|
Compatibility
Part #: 61.132.037.02 |
| For applications where the required splay angle is greater than the full 5° capability of MILO’s rear AlignaLinks, the MVE-MILO vertical extension bars can help. They are most useful when high-frequency reflections from a specific area – such as a balcony in a theatre or arena – must be minimized. The MVE-MILO extension bars replace the front triangular AlignaLinks on the top cabinet where the extended angle is required. The splay angle can be increased by an additional 3°, 6°, or 9°. This effectively provides up 12° (3° maximum of the rear AlignaLinks plus 9° maximum of the MVE-MILO) splay angle. Important: MILO and MILO 60 only. MVE-MILO Kit - which includes (2) bars is p/n 40.132.130.01. |
 |
|
Compatibility
Part #: 40.132.039.02 |
| This heavy-duty transport frame is easy to attach to a MILO, MILO 120 or MILO 60 high-power curvilinear loudspeaker. The frame is built to take the weight of up to 24 MILO loudspeakers (or equivalent weight of any combination of MILO, MILO 60, MILO 120 and the MILO 120-I insert) during rigging and tear down. For safety reasons, we recommend that a maximum of four cabinets be stacked on the frame during transit. The frame is also available with 2 by 5-inch HDPE bumpers installed on all four sides, adding a 1-inch space between stacks of loudspeakers when packed. Important: Includes bumpers. p/n 40.132.039.01 is without bumpers. p/n 40.132.150.01 is the frame extension kit - raises the caster to facilitate traveling with MG-3D/M grid on top of block. |
 |
|
Compatibility
- MILO
- MTB-2D/M
- MILO 120
- MILO 60
Part #: 40.132.034.01 |
| When acute array angles are desired, the PBF-MILO pull-back frame can be fitted to the bottom of the lowest MILO, MILO 120 or MILO 60 high-power curvilinear loudspeaker in an array. The PBF-MILO provides a pair of attachment points for a standard shackle linked to a dedicated lift motor. (MTB-2D/M transition bar kit required.) Important: MTB-2D/M transition bar kit required (Part Number 40.132.033.01). |
 |
MTF MILO / MICA
Transition Frame
|
Compatibility
Part #: 40.147.043.01 |
| The MTF-MILO/MICA transition grid allows MICA to be flown below MILO for downfill applications. The compact frame creates minimal space between MILO and MICA cabinets, for both aesthetic and acoustic benefits. Up to 8 MICA may be flown from this frame at a 7:1 safety factor, or 12 MICA cabinets at a 5:1 safety factor. |
 |
|
Compatibility
- MILO
- M2D
- MG-2D
- PBF-MILO
- MILO 60
- MILO 120
Part #: 40.132.033.01 |
| The MTB-2D/M transition bar facilitates connection of a MG-2D multipurpose grid underneath a MILO array to allow simple and secure attachment to M2D compact curvilinear array loudspeakers being used for near and/or down fill applications. |
Replacement Parts
|
MRF-MILO Left
Rigging Frame
|
Compatibility
Part #: 40.132.020.01 |
| MILO left side rigging frame replacement kit Important: This is a replacement part. It does not include pins or links. It is included when ordering MILO. |
|
PIN-QRP
Connecting Hardware
|
Compatibility
- MILO
- MILO 60
- MILO 120
- MICA
- 700-HP
- 600-HP
Part #: 134.021 |
| 3/8" X 1.125" QRP Blue button-head. Used in all MILO, MICA, 700-HP and 600-HP rigging holes. (Except in MILO front-bottom positions where 132.022 QRP is used) |
|
PIN-QRP
Connecting Hardware
|
Compatibility
Part #: 134.022 |
| 3/8" X 1.125" QRP Black small button-head. Two used in MILO to semi-permanently secure the front AlignaLinks |
|
