Meyer Sound : QuickFly Products

Your search for "UPA-2P" returned the following:

MG-1D

Multipurpose Grid

3D Cad File M1D Assembly Guide

Compatibility

M1D
M1D-Sub
M2D
DF-4
UPA-1P
UPA-2P
MSL-4
DS-4P

Part #: 40.115.100.01

The versatile MG-1D multipurpose grid allows M1D/M1D-Sub loudspeakers to be flown or ground stacked. MG-1D also provides a transition from the bottom of an M2D/M2D-Sub array to an M1D/M1D-Sub array. Up to 16 M1Ds (or the equivalent weight of M1Ds and M1D-Subs) may be suspended from single or multiple rigging points of appropriate rating. In addition the MD-1D can be used to fly M2Ds and/or M2D-Subs. Up to seven M2Ds (or the equivalent weight of any combination of M2Ds and M2D-Subs) can be flown from the MG-1D grid at a 7:1 safety factor, or 10 M2Ds at a 5:1 safety factor.

MYA-UPA

Mounting Yoke Assembly

3D Cad File

Compatibility

UPA-1P
UPA-2P

Part #: 40.076.038.02

The cradle-style MYA-UPA mounting yoke assembly is available for a single UPA-1P compact wide coverage or UPA-2P compact narrow coverage loudspeaker. The cabinet must be fitted with two M10 nut plates (included) on its base. A hanging clamp (“C” or “G” type) and a steel safety cable are required (not supplied as a part of the yoke assembly kit).

Important: Does not include hanging clamp and steel safety cable. Ships with M10 bolts requiring an M10 Nut Plate on the UPA for attachment.

MRF-UPA30

Rigging Frame

3D Cad File

Compatibility

UPA-2P
MRFPB-UPA

Part #: 40.077.038.09

The steel MRF-UPA30 rigging frame is used for arraying UPA-2P compact narrow coverage loudspeakers at fixed 30° splay angles. The MRFPB-UPA rigging frame pick-up bar is required for hanging and tilting. Also, UPA-2P's must be equipped with ring and stud (not supplied as a part of the frame kit).

Important: Requires MRFPB-UPA pick-up bar for hanging and tilting.

MRFPB-UPA

Rigging Frame Pick-up Bar

3D Cad File

Compatibility

UPA-2P
MRF-UPA30

Part #: 40.077.038.10

The MRFPB-UPA rigging frame pick-up bar is placed on the ends of and/or between two MRF-UPA30 rigging frames to provide multiple points for tilting a UPA-2P compact narrow coverage loudspeaker array.

MSMP-UPA

Stand Mount Plate

Compatibility

UPA-1P
UPA-2P

Part #: 40.076.056.01

The custom MSMP-UPA stand mount plate is available for the UPA-1P compact wide coverage and UPA-2P compact narrow coverage loudspeakers. It accepts an Atlas or Ultimate Support BMB-200K “top hat” adapter (not included).